Silica Carbide Diesel Particulate Filter Ceramic Honeycomb Filter

• Customization: Available
• Car Make: Performance Car
• Car Model: Efficient Performance Car
• Body Material: Steel
• Discharge Standard: Euro IV
• Certification: ISO9001
• Noise Source: The Noise of Engine
• The Noise of Engine: Aerodynamic Noise
• Automobile Chassis Noise: Aerodynamic Noise
• Component: Catalytic Converter
• Main Market: Southeast Asia
• Transport Package: Wooden Crate Pallet
• Trademark: JJXY
• Origin: China
• HS Code: 8421999090
• Production Capacity: 1000000

Product Description

Product Description

Basic information of product description

Diesel particulate filter, also known as diesel particulate filter (DPF). The main component of diesel exhaust emissions is carbon particles. Diesel particulate filter is a device that reduces particulate emissions by filtering, installed in the diesel exhaust system. Its carbon particle filtration efficiency reaches over 90%. Partially soluble organic compounds (SOF), especially those with high boiling points, may be captured.
At present, there are three types of filter materials studied and used in China: ceramics, metals, and composite materials. The common types are ceramic based (cordierite or silicon carbide) and metal based (stainless steel wire mesh) diesel particulate filters.
The working principle of a particle filter is to take turns blocking both ends of the porous honeycomb ceramic and filtering PM through the ceramic wall.
Filter regeneration: By increasing the gas temperature in the filter, particulate matter is burned to filter out the accumulated particles in the filter, ensuring its functionality. The characteristics of particulate matter in diesel exhaust gas are related to oxygen concentration. It will burn at a temperature of 550-650 ° C.
Diesel particulate filter (DPF) based on Sic
The diesel particulate filter based on Sic is a high-tech product. Mainly used for producing new generation diesel clean emission systems, achieving EUIII and EUIV standards
The working principle of carbon based diesel particulate filter for carbon particle purification target is to reduce 96.5% of carbon particle emissions. Firstly, the carbon particles in the diesel exhaust are retained, and then the carbon particles are removed through electric heating, fuel burners, etc., ultimately achieving the carbon particle emission standard.
The diesel particulate filter adopts a honeycomb structure. It has independent openings and channels are blocked at both ends. Waste gas enters from one opening end, passes through the porous honeycomb wall, and finally exits from adjacent channels. Carbon particles remain on the channel wall because they are too large to pass through the wall holes and will not be emitted into the air.
1. Diesel particulate filter substrate: Our DPF substrate is an economical porous wall flow ceramic
Filters, also used for diesel particulate matter removal, are called diesel particulate filters.
This ceramic filter is made of modified cordierite (2MgO-Al2O3-5SiO2), and our DPF achieves high efficiency by providing the following functions
Particle capture system:
*Low thermal expansion
*High filter specific surface area

*Low pressure drop
*Long term durability performance
*High dust removal rate:>95.4%
*This product is only a carrier for catalytic diesel particulate filter (CDPF), as shown below.
2. Catalytic diesel particulate filter (CDPF)
Catalytic diesel particulate filter is a solution for diesel particulate matter control 95% PM filtration
Through wall flow ceramics
The combination of honeycomb and patented catalyst formula achieves efficiency and low regeneration temperature. In addition to reducing particulate matter, catalytic diesel particulate filters
It can also reduce carbon monoxide and hydrocarbons in engine exhaust gas.
The current product supply covers a single CDPF ranging from 2.5 liters (5.66x6 ") to 25 liters (11.25x15")
This will be the perfect solution for diesel engines with displacement ranging from 2 liters to 20 liters.
The main characteristics of BHLJ catalyst include:
*Pressure drop
Low * Excellent performance
*Under special conditions
Self regeneration * can be applied to both road and off road diesel engines
*Standard or customized configurations available

project
Thermal shock resistance	Keep at 450 ºC for 30 minutes, quickly remove and cool at room temperature for 30 minutes. Repeat this process continuously for 3 times		muffle furnace
compressive strength	A-axis	>=7.5Mpa	Compression strength machine
	B-axis	>=2Mpa
Thermal conductivity (W/m · K)	23±11
Linear expansion coefficient	(20-800 ºC; × 10-6/ºC): Final value and peak value ≤ 5.0;		Thermal expansion coefficient meter
Water absorption rate	22%-26%		Electronic scale
Average aperture (μ m)	13±2;
Aperture distribution (cm3/g)	1. ≥40μm:0.00~0.05, 2. 40-20μm:0.00~0.03, 3. 20-10μm:0.00~0.25, 4.  ≤10μm:0.00~0.03;
chemical composition	AL203	4.26±0.2
	Mg0	1.01±0.2.
	Si02	13.75±3.0,
	Si:	8.26±1.0,
	SiC:	72.00±2.0,

 

Detailed Photos