China Storage Media Supplier Honeycomb Ceramic Heat Exchanger Honeycomb Heater Ceramic Regenerator for Rto

• Customization: Available
• Cell Shape: T-Shaped
• Material: Porcelain Material
• Transport Package: Cardboard Box/Wooden Pallet
• Specification: 101*101*102mm/305*305*102mm
• Trademark: JJXY
• Origin: China
• HS Code: 6909110000
• Production Capacity: 1000000

Product Description

 

Product Description

 

Traditional honeycomb ceramics have narrow, one-way channels that impose strict requirements on product verticality and installation workers. During initial installation, strict requirements are imposed
Fill neatly and align the airflow channels strictly, otherwise there may be short flows of untreated air or pressure caused by pressure holes during operation
The problem of rapid increase in installation costs has raised higher demands on installation workers and resulted in longer installation hours. Plate honeycomb ceramic collection
The installation method of 90 ° vertical cross between layers is simple and convenient, with strong adaptability for on-site installation, and the length and width can be adjusted freely,
No special hole or cutting is required to avoid the problem of sudden pressure drop in the future

Detailed Photos

project
Thermal shock resistance	Keep at550 ºC for 30 minutes, quickly remove and cool at room temperature for 30 minutes. Repeat this process continuously for 3 times		muffle furnace
compressive strength	A-axis	>=4.4Mpa	Compression strength machine
	B-axis	>=1.4Mpa
Thermal expansion coefficient (room temperature -800 ºC)	≤ 1.0 * 10-6/ºC (A-axis).		Thermal expansion coefficient meter
Water absorption rate	20%-26%		Electronic scale
chemical composition	AL203	(18-23)%,
	FE2	(1.5)%;
	Si02	(65-67)%,
Maximum softening temperature	>=1200ºC
verticality	Height ≤ 100 mm, verticality ≤ 1 mm; Height>100
Parallelism	Diameter ≤ 100mm, tolerance ≤ 1mm; Diameter>100mm, tolerance ≤ 3% of product outer diameter size.